• STRIP LIGHTS

FLEXI STREAMLINE 24V SINGLE COLOUR WHITE 10M KIT FLBP24V10M - 6W/M

Versatile, CRI>90, COB LED single colour white, 10m strip kit, IP20, strip width 8mm.

Application

Ideal for residential features

Design Specifications

  • 10 metre strip kit includes COB strip, with adhesive tape, plug and play driver

  • Beam distribution 140°, 4000/6000K

  • Streamline COB LED chip technology, providing a smooth lighting profile

  • Non-dimmable driver as standard

  • Heat sink required for system performance, LED channel options refer this section

Performance

  • Dimmable - NO
  • WARM WHITE3000K
  • COOL WHITE4000K
  • DAYLIGHT6000K
  • Dimensions - Wiring Diagrams
  • Design Options
  • Photometric Data
  • FAQ

    Do you have any more questions? Simply check our FAQs page or contact our customer service team. 

     
  • Downloads
  • Technical Specifications
    Product Model No. Input Voltage Watts per metre Beam Angle CRI Lumens per metre LEDs Per Metre Cutting Interval CCT Body Colour Dim Add to Enquiry
    • Use your collection cart to make an enquiry, send your collection to a friend via email, or easily download multiple datasheets with a single click
      Close
    Model No.FLBP24V10M/WW Input Voltage240 Watts per metre6 Beam Angle140 CRI90 Lumens per metre530 LEDs Per Metre320 Cutting Interval50 CCT3000 Body ColourCLEAR Dim10000(L) x 8(W) x 2(H) Add to Enquiry Add Remove Remove
    Model No.FLBP24V10M/CW Input Voltage240 Watts per metre6 Beam Angle140 CRI90 Lumens per metre580 LEDs Per Metre320 Cutting Interval50 CCT4000 Body ColourCLEAR Dim10000(L) x 8(W) x 2(H) Add to Enquiry Add Remove Remove
    Model No.FLBP24V10M/DL Input Voltage240 Watts per metre6 Beam Angle140 CRI90 Lumens per metre610 LEDs Per Metre320 Cutting Interval50 CCT6000 Body ColourCLEAR Dim10000(L) x 8(W) x 2(H) Add to Enquiry Add Remove Remove

    Cuttable every 50mm NOTE: when cutting LED strips greater than 50% of the kit length, it is always important to calculate the remaining LED load to reconfirm its compatibility with the existing driver, as driver changes may be required with moderate reduction in loads

(1) Due to continued product and technology enhancements, data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee unless expressly confirmed in writing by SAL at the time of order. (2) Products are sold in accordance with SAL Terms and Conditions of sale and all images shown are for illustration purposes only and may vary from the actual colour or finish. (3) Unless specifically stated, all Interior product IP ratings nominated are from "below the ceiling". IC ratings (if any) apply to the downlight only. (4) VEET, IPART & REES approval validation must only be sourced via the dedicated web listed catalogues; icons shown (if any) on the relevant product page are a guide only and do not guarantee approvals for individual models. (5) With the exception of DIY lamps, all other products must be installed by a qualified electrical installer.
With over 1000 Australian trade partners, finding where to buy SAL products is easy.  Search a trade partner nearby 

Related Products