Product Search...

SUGGESTIONS

    No results

    PRODUCTS

      No results

      Product not found.

        • LED STRIP LIGHTS

        NEON SIDE BEND 24V SINGLE COLOUR IP66 FLN2407 7W/M

        Roll length 10m, maximum run length 10m, flexible Neon SIDE Bend strip, 24V, IP66, Neon width 10mm.

        Application

        A very flexible solution for residential and commercial interior spaces

        Design Specifications

        • High efficiency LED optics, luminous efficacy up to 40lm/W, beam distribution 270°

        • Maximum run length 10m, cuttable every 50 mm

        • Smooth colour uniformity

        • SIDE-BEND Blue, Yellow, or White in 3000K/4000K/6000K colour choices, CRI >80

        • Dimming options: (quick link)
          Type A - Trailing edge dimming,
          Type B - LED strip controller LT8915DIM/BT
          with LT8914DIM/RP if required,
          Type C - Analogue 1-10V
          Type D - DALI 2 control

        • Power supply ordered separately, 7 W/m, termination accessories available, codes listed are per metre, 10M roll packs to order

        Performance

        • Dimmable - OPTIONAL
        • Dimmer Type - refer dimming options
        •
        • WARM WHITE3000K
        • COOL WHITE4000K
        • DAYLIGHT6000K
        • Dimensions - Wiring Diagrams
        • Design Options
        • Photometric Data
        • FAQ

          Do you have any more questions? Simply check our FAQs page or contact our customer service team. 

           
        • Downloads
        • Technical Specifications
          Product Model No. Add to Enquiry
          Use your collection cart to make an enquiry, send your collection to a friend via email, or easily download multiple datasheets with a single click
          		Input Voltage Watts per metre Beam Angle CRI Lumens per metre LEDs Per Metre Cutting Interval CCT Dim
          		Model No. FLN2407WW17 Add to Enquiry Add Remove Remove Input Voltage 24 Watts per metre 7 Beam Angle 270 CRI 80 Lumens per metre 250 LEDs Per Metre 120 Cutting Interval 50 CCT 3000 Dim 10(W) x 17(H)
          		Model No. FLN2407CW17 Add to Enquiry Add Remove Remove Input Voltage 24 Watts per metre 7 Beam Angle 270 CRI 80 Lumens per metre 250 LEDs Per Metre 120 Cutting Interval 50 CCT 4000 Dim 10(W) x 17(H)
          		Model No. FLN2407DL17 Add to Enquiry Add Remove Remove Input Voltage 24 Watts per metre 7 Beam Angle 270 CRI 80 Lumens per metre 250 LEDs Per Metre 120 Cutting Interval 50 CCT 6000 Dim 10(W) x 17(H)
          		Model No. FLN2407YW17 Add to Enquiry Add Remove Remove Input Voltage 24 Watts per metre 7 Beam Angle 270 CRI 80 Lumens per metre 45 LEDs Per Metre 120 Cutting Interval 50 Dim 10(W) x 17(H)
          		Model No. FLN2407BU17 Add to Enquiry Add Remove Remove Input Voltage 24 Watts per metre 7 Beam Angle 270 CRI 80 Lumens per metre 50 LEDs Per Metre 120 Cutting Interval 50 Dim 10(W) x 17(H)
          		Model No. FLN17EC Add to Enquiry Add Remove Remove
          		Model No. FLN17LB Add to Enquiry Add Remove Remove
          		Model No. FLN17LE Add to Enquiry Add Remove Remove
          		Model No. FLN17LS Add to Enquiry Add Remove Remove

          Note: For exterior applications, installation in spaces exposed to direct UV exposure is not recommended

        (1) Due to continued product and technology enhancements, data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee unless expressly confirmed in writing by SAL at the time of order. (2) Products are sold in accordance with SAL Terms and Conditions of sale and all images shown are for illustration purposes only and may vary from the actual colour or finish. (3) Unless specifically stated, all Interior product IP ratings nominated are from "below the ceiling". IC ratings (if any) apply to the downlight only. (4) VEET, IPART & REES approval validation must only be sourced via the dedicated web listed catalogues; icons shown (if any) on the relevant product page are a guide only and do not guarantee approvals for individual models. (5) With the exception of DIY lamps, all other products must be installed by a qualified electrical installer.
        With over 1000 Australian trade partners, finding where to buy SAL products is easy. Search a trade partner nearby

        Related Products